| Headtube | 34mm I.D. |
| Headset | EC34, 30.0 crown race |
| Fork | Straight 1 1/8″ steerer, 300mm long |
| Bottom Bracket | BSA threaded, 68mm width |
| Crankset Compatibility | Standard road compact double 50/34. Newer, wider gravel cranks are compatible. 42t maximum ring size for 1x crank |
| Front Derailleur | 28.6mm road front derailleur clamp |
| Wheel/Tire Size | Optimal tire size 700c x 32mm. Max tire size 700c x 35mm measured tire with Shimano or Velo Orange calipers, 32mm with Tektro calipers. The road frame is not compatible with 650b wheels, even with a 75mm reach caliper. The brake bridge and fork crown mount is simply too high for the pads be adjusted to 650b wheels. |
| Seatpost | 27.2mm |
| Seat Clamp | 30.0mm (included) – a 29.8 clamp would also work with a bit of finesse to install |
| Dropper Compatibility | N/A |
| Brake Compatibility | 47mm – 57mm reach calipers |
| Rotor | N/A |
| Hub Spacing | 100mm QR front / 130mm rear |
| Front Axle | Standard 100mm quick release |
| Rear Axle | Standard 130mm quick release |
| Rack and Fender Fitment | Eyelets on dropouts are intended for fender mounting only. Rear rack not recommended, but may be possible with minimal (less than 5lb) load |
| Water bottle mounts | Two on all sizes |
| Fenders | Yes. Maximum fender width of 35mm. Maximum tire size 28mm w/ fenders |
| Frame Saver? | All frames are coated inside and out with a corrosion resistant black electrophoretic deposition (BED) coating. A frame saver spray isn’t necessary, but if you are going to ride in a wet area, a shot of Frame Saver™ or Boeshield® couldn’t hurt, especially in the lower part of the frame were moisture could collect. |
| Frame/Fork Weight | 56cm Frame w/ all bolts, seat clamp, guides, stops – 4lbs. 3 oz. Fork with uncut 300mm steerer tube 2lb. 1oz. Add or subtract a few ounces for each larger or smaller size. |
